Mobile
Log In Sign Up
Home > chinese-english > "voltage of power supply" in English

English translation for "voltage of power supply"

供电电压
Example Sentences:
1.The voltage of power supply is different depending on the country . please buy an ac power adaptor in the country / region where the radio is to be used
因为各国的电压不同,故须在收听广播的国家/地区采购适于当地电压的ac电源转接器使用。
2.At the same time , the parameter monitoring circuit is designed to check the operational parameters of pharos that include voltage of power supply , operational current , based on lm339 voltage comparer , optical sensor and logical circuit
以lm339电压比较器为核心,结合光传感器、逻辑电路等,设计出参数检测电路,监测航标灯的电源电压、工作电流等工作参数。
3.At the same time duamoop feedforward power amplifier is sensitive to the change of working environment ( including the temperature , the working frequence , the power , parts of an apparatus aging and voltage of power supply etc . ) , which has a great effect to the stability of performance , so must take some measures to clear up the affect and insure the system " reliability
同时,双环前馈放大器对工作环境(温度、频率、功率、器件老化、电源电压等)的变化十分敏感,对性能的稳定性影响很大,必须采用相应的措施来消除这些影响,以保证系统的可靠性。
4.Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead
通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点,发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下,通过调节焊接回路中的电感量和电源电压,可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行,并且熄弧时间最短时,短路过渡频率最高,在这种情况下,飞溅小,焊道成型好,焊接过程稳定
Similar Words:
"voltage node" English translation, "voltage of alternating current" English translation, "voltage of cathode grid" English translation, "voltage of light source" English translation, "voltage of microphonic effect" English translation, "voltage of qrs complex" English translation, "voltage of slag bath" English translation, "voltage of supply" English translation, "voltage of system" English translation, "voltage of transformation" English translation